Guangdong Hengda New Materials Technology Co., Ltd.
Main products:Shadowless Adhesive,Silicone Rubber,Red Gasket Maker,Full Transparent AB Glue,Instant Glue
Products
Contact Us
  • Contact Person : Ms. Xu wanda
  • Company Name : Guangdong Hengda New Materials Technology Co., Ltd.
  • Tel : 86-752-2372651
  • Fax : 86-752-2372654
  • Address : Guangdong,huizhou,dutian industrial district, Longfeng, Huizhou, Guangdong, China
  • Country/Region : China
  • Zip : 516001

Kafuter-General Purpose PU Sealant& Polyurethane Construction Sealant Adhesive

Kafuter-General Purpose PU Sealant& Polyurethane Construction Sealant Adhesive
Product Detailed
PU sealant 1.one-part, white paste 2.muiti-purpose,fast cure in minutes 3.environment, easy to use 4.310ml/tube

                Kafuter-Multi Purpose Polyurethane Construction Sealant& PU Sealant 

Characteristics:

 *One-part, fast cure, polyurethane sealant

* Fast cure, easy to inject, no solvents, no flowing on elevation coating

* Low-temp tolerance, oil and water proof, salt-fog resistance, and anti-aging, crack, and fatigue.

* an environment-friendly product without produce any poison and pollution.

* Have excellent compatibility with glass, metal, wood, plastics, and other multi-substrates.

* The cured surfaces can be grinded, sprayed, and coated.

Applications:

Weld, joint, and seal in cars, railways, retainers, freezers, ships, pipes and air trunks, or use as building materials sealing for water or dust proof, or car’s maintenance.

Properties:

Item

Multi-Purpose Polyurethane Sealant

                            Appearance

White Paste

Density(g/cm3)

1.35±0.05

Initial Cure Time(25°C,min)

10~30

Sagging(mm)

≤3

Cure Time(mm/d)

3~5

                              Volatility(%)

≤3

Hardness(Shore A)

35±5

Tensile Strength(MPa)

≥1.5

Shear Strength(MPa)

≥1.0

                        Elongation(%)

≥400

Extrusion(ml/min)

                                 ≥80

Working Temperature Range(°C)

+5~+35

Packing:

310ml/aluminium tube

20tube/case

 Directions

1. Use cotton yarn with acetone ethanol or other organic solvents to clean off the rust dust,water,oil,etc.2. Remove the cover and pierce the inner seal, and then cut the nozzle in triangle shape to make sure the glue squeeze out with the same shape, using glue gun put the glue on the surfaces.

3. Best used in temperature of 5°C-35°C and humidity 35%-65%RH, keep the working condition completely ventilated

4. use the alcohol to clean the uncoated surfaces, after injecting,please tighten-seal the remained glue in a dry and cool place. 

Notes:

(1)Keep away from children

(2)Avoid contacting with skin and eyes; if contact, please flush with  water, or else become seriously, go to hospital

Kafuter-General Purpose PU Sealant& Polyurethane Construction Sealant Adhesive



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.